多层介质膜脉宽压缩光栅清洗方法研究

采用SPM (Sulfuric-Peroxide Mixtures, 98wt%H₂SO₄+30wt%H₂O₂)+兆声(方法1)和氧等离子体+HPM (Hydrochloric/Peroxide Mixture, 37wt%HCl+30wt%H₂O₂+DIH₂O)+兆声(方法2)两种清洗方法对多层介质膜脉宽压缩光栅进行清洗, 并对清洗前后样品的表面元素含量、衍射效率、表面粗糙度、表面温升以及激光损伤阈值等参数进行测量以评估两种清洗方法清洗效果。在入射角70°, 脉宽12 ns, s偏振, 波长1064 nm的激光辐照下, 经过清洗方法1清洗后的光栅样品单脉冲激光损伤阈值为7.55 J/cm ², 而方法2清洗后的样品损伤阈值为5.32 J/cm ²。另外, 虽然经过方法2清洗后样品表面杂质含量更低, 但是在衍射效率、表面粗糙度和表面温升都劣于经方法1清洗后的样品, 进一步分析发现方法2中氧等离子体清洗过程引入的Fe元素影响了其样品损伤性能和温升性能。因此, SPM清洗方法可以作为多层介质膜脉宽压缩光栅提升抗激光损伤性能的优化清洗方案。     

Computer Network Assisted Test of Spoken English

With the development of computer network technology, the means of foreign language teaching have changed. Computer aided spoken English test is a new test method, and there is a great advantage compared with the traditional oral test. In order to further understand the superiority of the computer aided spoken English test, this study took the sophomores of Foreign Language Department in Henan University of Chinese Medicine, China, as the subjects and carried out the traditional interview-type spoken English test and computer-assisted spoken English test. The score system based on Hidden Markov Model (HMM) was used, and then the two tests were carried out. The performance in the two tests was compared, and the attitudes of the participants to the computer assisted Spoken English test were analyzed in the form of questionnaires. The results showed that the computer aided spoken English test could better reflect the true level of the students, and the teachers and students clearly stated that the computer aided spoken English test could relieve tension and reduce the burden of teachers. The research verified the feasibility of the computer-assisted spoken English test, which provides a reference for the promotion of the computer-assisted spoken English test.     

A comparison of visual ability and its importance awareness between novice and experienced drivers

The visual ability factors of peripheral perception, visual reaction and visual pursuit ability are important for safe driving. Thus, this study explored the influence of driving experience on these visual ability factors. Sixty-five drivers, including novice and experienced drivers, participated in this study. The visual ability levels of the three factors were measured by the Vienna Test System. In addition, driver's awareness of the three factors' importance for safe driving was measured by questionnaire items. Results showed that out of the three factors, drivers' peripheral perception ability was correlated significantly with their driving experience. Experienced drivers had higher peripheral perception ability than that of novice drivers. In addition, compared with novice drivers, experienced drivers believed that peripheral perception was more important whereas visual reaction was less important. It is suggested that higher attention should be paid to peripheral perception in driving training and novice drivers should increase their importance awareness for this factor.     

Preparation and electrochemical characterization of Ti-based amorphous metallic glass with high strength

Ti-based amorphous metallic glasses have excellent mechanical, physical, and chemical properties, which is an important development direction and research hotspot of metal composite reinforcement. As a stable, simple, efficient, and large-scale preparation technology of metallic powders, the gas atomization process provides an effective way of preparing amorphous metallic glasses. In this study, the controllable fabrication of a Ti-based amorphous powder, with high efficiency, has been realized by using gas atomization. The scanning electron microscope, energy-dispersive spectrometer, and X-ray diffraction are used to analyze surface morphology, element distribution, and phase structure, respectively. A microhardness tester is used to measure the mechanical property. An electrochemical workstation is used to characterize corrosion behavior. The results show that as-prepared microparticles are more uniform and exhibit good amorphous characteristics. The mechanical test shows that the hardness of amorphous powder is significantly increased as compared with that before preparation, which has the prospect of being an important part of engineering reinforced materials. Further electrochemical measurement shows that the corrosion resistance of the as-prepared sample is also significantly improved. This study has laid a solid foundation for expanding applications of Ti-based metallic glasses, especially in heavy-duty and corrosive domains.     

A theoretically-based novel protocol for the analytic treatment of the glass failure stresses associated with coaxial double ring test method

With the aim of validating a new standardized Coaxial Double Ring testing procedure, without overpressure and with fixed geometry, an ad hoc theoretical approach has been proposed here to rearrange the laboratory outcomes accounting for the effects of the geometric non-linearities associated with such a testing configuration. By borrowing this idea, once the experimental values of the failure load have been determined, it has been possible to obtain an expression in closed form (fully defined by only two coefficients) of the maximum tensile stress (σ_max) in the core of the specimen. Following this, in order to make the laboratory outcomes comparable and homogeneous, the σ_max-values have been then re-scaled to a common reference condition (equibiaxial stress on a reference area, σ_eqbx), by means of the use of a correction coefficient (K) able to determine, under a condition of equal probability of failure, the effective area (A_eff) of the tested specimens. After being corrected to account for the effects of the stress corrosion cracking (static fatigue effect), all re-scaled data have been finally interpreted using a Weibull-type statistical distribution to determine the main fractile values of the glass strength. Doing so, despite some unavoidable approximations, this procedure furnished a highly effective means of determining the bending strength of float glass. Unlike the pure numerical approach proposed in codes and literature, which requires to correct the experimental data via FEM simulation, the rationale behind the proposed approach is in fact to elaborate the experimental data through an analytic treatment of the problem, which would greatly facilitate the interpretation of the data as well as the standardization of the testing procedure.     

Sub-band coding of hexagonal images

According to the circle-packing theorem, the packing efficiency of a hexagonal lattice is higher than an equivalent square tessellation. Consequently, in several contexts, hexagonally sampled images compared to their Cartesian counterparts are better at preserving information content. In this paper, novel mapping techniques alongside the wavelet compression scheme are presented for hexagonal images. Specifically, we introduce two tree-based coding schemes, referred to as SBHex (spirally-mapped branch-coding for hexagonal images) and BBHex (breadth-first block-coding for hexagonal images). Both of these coding schemes respect the geometry of the hexagonal lattice and yield better compression results. Our empirical results show that the proposed algorithms for hexagonal images produce better reconstruction quality at low bits per pixel representations compared to the tree-based coding counterparts for the Cartesian grid.     

虚实结合的可穿戴产品适合性检验研究

目的 为了更科学地研究和检验可穿戴产品的适合性,提出一种适合性检验方法,能够精确保留现实环境中的产品佩戴关系,并能将现实与虚拟的适合性检验研究相结合,得到合理的适合性检验结果.方法 以虚拟现实眼镜的适合性检验为例,通过高精度的三维测量技术将现实环境中的人、产品以及人—产品佩戴关系转化为三维虚拟信息,并以人—产品佩戴三维模型为参考基准对齐人和产品的虚拟模型,得到保留现实佩戴关系的人—产品佩戴模型组,再应用偏差分析法得出人—机佩戴区域的可视化适合性结果和统计数据,结合主观评价方法进一步分析产品的适合性.结论 虚实结合的产品适合性检验方法可在虚拟环境中高精度地保留现实环境中的人—产品佩戴关系,并能得到可视化的适合性检验结果,为检验和指导产品的适合性提供依据.     

Clinical significance of contact lens related changes of ocular surface tissue observed on optical coherence images

PurposeTo investigate the relationship between the real contact lens imprint into the conjunctival tissue, observed by optical coherence tomography (OCT) and conjunctival staining and contact lens wearing comfort.Methods17 participants (mean age = 26.6 SD ± 3.6 years; 7 females) were fitted with three different contact lenses base curves of the same silicone hydrogel custom lens type (Visell 50; Hecht Contactlinsen, Au, Germany) in a randomised order. One lens was optimally fitted according to the manufacturer's recommendation, one fitted 0.4 mm flatter and one fitted 0.4 mm steeper. After 4 h of lens wear the contact lens edge in the area of the conjunctiva was imaged nasally and temporally using OCT (Optovue iVue SD-OCT). To correct the artefact due to optical distortion with OCT, the imprint of all worn lenses was measured on a glass plate afterwards. Conjunctival staining in the limbal region after 4 h of lens wear was classified using the CCLRU Grading Scale. Comfort scoring was based on visual analog scales from 0 (very poor) to 100 (excellent).ResultsThe mean conjunctival imprint of all contact lens edges was 32.0 ± 8.1 μm before and 7.3 ± 6.5 μm after distortion correction of the OCT images. The distortion corrected conjunctival imprint with the 0.4 mm steeper lens (11.5 ± 6.2 μm) was statistically significantly greater compared to the optimally fitted lens (6.5 ± 5.9 μm) (One-way ANOVA followed Tukey-test; p = 0.017) and greater compared to the 0.4 mm flatter lens (3.9 ± 5.3 μm) (p < 0.001). There was no statistically significant difference between the optimally fitted lens and the 0.4 mm flatter lens (p = 0.209). The nasally measured imprint (11.4 ± 9.0 μm) was significantly greater than the temporally measured (3.3 ± 7.6 μm) (p < 0.001). There was no statistically significant correlation between the amount of conjunctival imprint and the graded conjunctival staining (p = 0.346) or the wearer’s comfort (p = 0.735).ConclusionsContact lens edges imaged by OCT exhibited displacement artefacts. The observed conjunctival imprints are a combination of real conjunctival compression and artefacts. A deeper imprint of the contact lens into the conjunctiva caused by a steeper base curve was not related to clinically significant staining or changes in comfort after 4 h of lens wear. The observed differences between nasal and temporal imprint are likely to be caused by variations of conjunctival thickness and the shape of the underlying sclera.     

Compression properties of gas diffusion layers and its constitutive model under cyclic loading

The compressive deformation of gas diffusion layer (GDL), which is highly nonlinear and related to the loading history, affects the performance of PEM fuel cell stacks. However, linear elastic models are widely used. In this study, a new nonlinear constitutive model is proposed to describe the compression properties. Macroscopic studies reveal that GDL has different mechanical properties during the first and repeated compression stages. Besides, the tangent modulus has a significant linear relationship with stress. The constitutive model can be rebuilt using the micro-mechanical theory of fiber assemblies by considering the bending of carbon fibers. Furthermore, a prediction method is proposed to describe cyclic compression behavior. The prediction results fit well with the test results with an average and maximum relative error of less than 5.30% and 18.13%, respectively. These conclusions are beneficial to the design of GDL with specific mechanical properties and the real-time analysis of PEM fuel cell.